MOTUL showcasing solutions for machining of titanium at IMTEX 2017
The French oil and lubricant specialist is showcasing its range of titanium machining solutions at ongoing IMTEX 2017. The company showcasing products like Stabilis 9230, Safkool 6420, Biocool 3740 and Biocool 3210 among other cutting fluid solutions. The exhibition is scheduled from January 26th to February 1st at Bangalore International Exhibition Centre (BIEC).
MOTUL TECH offers a range of premium products especially designed for the machining of titanium.
Stabilis 9230
The Stabilis 9230 Is a high performance multipurpose fine emulsion kind soluble concentrate including a high quantity of base oil and high performance complex ester. It has been especially designed for severe machining operations and demanding markets such as the aeronautical one.
This product is answering the more demanding HSE legislation. It is free of: bactericide, isothiasolinone, DEA, chlorine, nitrite, sulfur, phosphorus additive, formaldehyde and formaldehyde releaser.
The Stabilis 9230 will bring the following benefits:
- Reduction of tool wear
- Optimization of surface finishes
- Better release of tramp oils
- Increase of the in-use product shelf life due to its high bio-stability and stability
- Increase of the output
- Decrease of the consumption
- Reduction of allergy risks
Safkool 6420
The Safkool 6420 is a multipurpose semi-synthetic soluble concentrate including a high performance complex ester. It has been especially designed for standard to severe machining operations and demanding markets such as the aeronautical one.
This product is answering the more demanding HSE legislation. It is free of: safety labelling, DEA, chlorine, nitrite, sulfured additives, phosphorus additives, formaldehyde and formaldehyde releaser
The Safkool 6420 will bring the following benefits:
- Reduction of allergy risks
- Increase of the in-use product shelf life due to its high bio-stability and stability even in very hard water
- Limitation of product losses through chips of machined parts
- Better release of tramp oils
- No foaming issue within the water hardness range [50ppm-800ppm]
- Cleanliness of the working environment thanks to the fineness of the microemulsion
Biocool 3740
The Biocool 3740 is a high performance synthetic soluble concentrate including a high amount of a specific PAG. It has been especially designed for sever machining operations requiring some very high pressure (up to 600 bars) and demanding markets such as the aeronautical one.
This product is answering the more demanding HSE legislation. It is free of: safety labelling, bactericide, isothiasolinone, DEA, chlorine, nitrite, sulfur, phosphorus additive, formaldehyde and formaldehyde releaser.
- The Biocool 3740 will bring the following benefits:
- Good sludge and micro-chips settling
- Decrease of tool wear
- Better surface finish of the parts produced
- Optimal release of foreign oil
- Increase of the productivity and the cutting speeds
- Cleanliness of the working environment
- Clearer visibility during machining operations
- Increase of the in-use product shelf life due to its high bio-stability and stability even in very hard water
- Reduction of allergy risks
Biocool 3210
The Biocool 3210 is a synthetic soluble concentrate especially designed for standard machining and grinding, it is totally suitable for demanding markets such as the aeronautical one.
This product is answering the more demanding HSE legislation. It is free of: safety labelling, DEA, chlorine, nitrite, sulfur, phosphorus, sulfur additives, formaldehyde and formaldehyde releaser.
The Biocool 3210 will bring the following benefits:
- Good sludge and micro-chips settling
- Limitation of product losses through chips of machined parts
- Optimal release of foreign oil
- Cleanliness of the working environment
- Clearer visibility during machining operations
- Increase of the in-use product shelf life due to its high bio-stability and stability even in very hard water
- Reduced consumption
- Reduction of allergy risks
